Kilargo IS5115B
The IS5115B brush seals are designed to be used around the head & jambs, door bottom and meeting stiles of single or double swing doors, revolving, tilt-up and roller doors. These IS5115B brush seals help protect against draught and dust, insects and weather penetration. The black nylon brush filaments, which are locked into a galvanized steel strip, are available fitted to an aluminium carrier, or as brush only.
Application and selection
Check the product model, dimensions, substrate, service type and installation method against the relevant manufacturer documentation. Fire resistance ratings apply to tested assemblies; they are not a universal rating for the material alone.
- Ambient-temperature smoke sealing
Product specifications
| Standard Lengths | 1000mm, 2250mm. Also available in: 250mm increments from 1000mm to 3000mm |
|---|---|
| Fixing | Brush only seals can be mortised into a nominal 3mm (w) x 4mm (d) groove (with the length slightly kinked for an interference fit) |
Technical documents
Documents are hosted on this website. Original technical, manufacturer, certification and emergency information is retained. Contact AODISI for sales enquiries.
PDF · Download Fact Sheet ↓PDF · Download Installation Sheet ↓Technical documents and related products
Use the Kilargo IS5115B technical documents to check dimensions, installation and suitability. For door gap seals and fire protection profiles selection, compare the following products in the same material category; matching categories do not imply interchangeability.