Lorient LAS9010 Flush Bolt + Drop Seal Architectural Seals
An innovative, slimline flush bolt designed for both the top and bottom of the door, seamlessly integrating with our most popular drop seal – LAS8001 si . The flush bolt is a security device used on pairs of doors to secure the inactive leaf. It is activated by a discreet Lorient-branded lever, dropping the bolt into a sleek keep in the floor. Specifically designed for use with our rebated high-performance drop seal, this system provides the ultimate combination of security with smoke, acoustic, and energy
Model and selection
Lorient LAS9010 Flush Bolt + Drop Seal Architectural Seals
Performance depends on the tested assembly, dimensions and installation. Review the current technical documents before specifying this product.
| Test evidence | Fire: BS EN 1634-1:2014+A1:2018 in an FD30 & FD60. Smoke: BS EN 1634-3:2004 at ambient temperature. Acoustic: BS EN ISO 10140-2:2010 (up to Rw 35dB). Classified to BS EN 12051: 2000. Durability: 50,000 cycles |
|---|---|
| Min/max gap size | 1mm/13mm |
| Location | Double doors. For use on both right & left handed doors. Suitable for bottom & top of the door |
| Material | Flush bolt - brushed stainless steel. Seal material - grey or black silicone rubber |
| Drop seal standard lengths | 335mm, 435mm, 535mm, 635mm, 735mm, 835mm, 935mm, 1035mm, 1135mm + 1235mm. Note: each length can be cut to the next size down. The 335mm can be cut back to 255mm |
| Use with | All standard lengths of LAS8001 si, with the ability to cut to size. *Cladding kits must be used for fire rated variants |
Technical documents
Hosted on this website. Original manufacturer and certification information is retained. Contact AODISI for sales enquiries.
PDF · Lorient Architectural Seals ↓PDF · LAS9010 flush bolt + drop seal datasheet ↓PDF · Kit 1-LAS9010 + LAS8001 si bottom of the door non-fire rated ↓PDF · Kit 2-LAS9010 FD60 bottom of door fitting instruction ↓PDF · Kit 3-LAS9010 + LAS8001 si top and-bottom of the door non-fire rated ↓PDF · Kit 4-LAS9010 FD30 bottom of door fitting instruction ↓Technical documents and related products
Use the Lorient LAS9010 Flush Bolt + Drop Seal Architectural Seals technical documents to check dimensions, installation and suitability. For fire door hardware and door sealing accessories selection, compare the following products in the same material category; matching categories do not imply interchangeability.
Fire door hardware & accessories →
- Lorient FSR 6000 Fingerguard Seal Cavity side
- Lorient Door Edge Protector Fire resistant
- Lorient EA280 Door Loop Concealed
Lorient LAS9010 Flush Bolt + Drop Seal Architectural Seals technical data and downloads